s52 + m20 clutch = what t/o bearing?

[Julien]

I've always thought if I use the g260 trans and m20 flywheel I need to use an e21 323i throw out bearing, is that correct?
Part #: 21511204525

can I get that from anywhere or just the dealer?

Thanks!
Julien

[aplinweiss_is]

I'm no pro here but I will tell you what I know.

I got my euro throw-out bearing from the dealer (I work there) and it came from germany. There are none in the states.

I also found one at pelican parts but it was more than my OEM one.

I'm swapping a M50 and plan on using the M20 flywheel and clutch with the getrag 240 and this is what my
searching yielded me.

good luck

[e30rapidic]

Mine TO bearing is a stock M20 one...just need a clutch stop.

[sticksdaman]

im using the zf throwout bearing with my zf320 m20 clutch and m20 flywheel

[graphikg]

Best I can remember is TO bearing matches the clutch and pilot bearing matches the tranny.

[Beej '86 325es]

Best I can remember is TO bearing matches the clutch and pilot bearing matches the tranny.

This.

[bloodshot-e30]

hope u have a beast ass M20 clutch.

[AnimalE30]

Best I can remember is TO bearing matches the clutch and pilot bearing matches the tranny.

Unless you're using a G250 with m20 clutch/pressure plate/fly wheel. In this case you would use euro 323.

[e30s50dan]

Mine...S50 g240 m20 fly/pp and 323i to bearing. You can get the TO bearing from pelican parts

[graphikg]

All this has actually been covered before and this would be the best place to go...

http://r3vlimited.com/board/showthread.php?t=184485

Its the 3rd time I refer that thread to someone I think - good info there for sure.

[matthugie]

^ now that is a good thread.

[lexx]

Unless you're using a G250 with m20 clutch/pressure plate/fly wheel. In this case you would use euro 323.

Good info here...I've never found a solid answer. I ended up having to extend (ghetto-rig) a g260 clutch slave for my m50/g250 setup.

[Julien]

and if i'm not mistaken you also have to use the e21 323i t/o bearing when using a g240 with an m20 flywheel.