Best shim or washer to use for motor mount on 24v for exhaust to clear?

[ill4noreason]

So I am running m52 Obd2 headers with a custom exhaust past the down pipe. I am rubbing on the swaybar what is the best shim or washer to use to get one side of the engine up a little? Thanks

[Matt-B]

you can space the subframe a bit, someone here sells the spacers, or heat exhaust pipe, and "bend" or "push" it in

[Wishno87]

Someone makes a spacer to move the sway bar down a bit..

[7pilot]

Agreed. Shim the swaybar down.
Don't raise the mass of the engine, especially if you are going to really drive the car.

m

[10Toes]

I just used a stack of fender washers.