New girl on the forum and...
Collapse
X
-
This is cool. Good to see you are tackling this project head-on and not afraid to get dirty. Props to you. Can't wait to see the finished product.Leave a comment:
-
Leave a comment:
-
UPDATE:



Just a little updates on what I picked up today.
So we drove to Sacramento to pick the motor up early in the morning (about 1 and half hour drive) and...
seriously guys this motor is bigger than me! ahhaa.
Danny, the gentleman who I picked up the motor from definitely hooked it up with an ECU, lots of other accessories, helped me secure the motor on the truck (which I don't know anyone that would even bother to do that) and other goodies. He was very kind and professional!I highly recommend him if you live around Sacramento .
You guys will just have to wait to see my bimmer, I will post pictures to update my progress .Promise ;)
so keep supporting and checking back !
Ps. idk if it's just me but people on the forum is a lot more welcoming than bimmerforums? :O
-JaylissaLast edited by JayyE30; 08-04-2011, 11:14 PM.Leave a comment:
-
-
You can do the swap in 1-2 days IF you plan for everything! I did my m30 swap over the weekend (and m30 swaps are harder to do vs. 24v swaps), and only because I forgot to get one part , otherwise it would have been done on 1 day. I built the engine/swap outside the car overtime of course, then swap over the weekend.
While the engine is out, do as much to it as you can before it ends up in the car. As in replace all GASKETS/SEAlS/RUBBER HOSES ..ALL of them.Leave a comment:
-
3-4k budget? sell your car, pool the money, buy an already swapped car!Leave a comment:
-
OK, sounds like you've got a pretty good head start on some of this. Here's some further thoughts...
- For brake booster I haven't got one yet , which one would you recommend?I m looking at e21
I went with the Zionsville Motorsports pre-modded E21 booster.
- Im looking at a 3.5 MAF with 4" intake and SAMCO SPORT Siilicone elbow
Eh, I probably wouldn't spend the dosh on the MAF. As far as the SAMCO elbow, I'd look around at a local speed shop. Probably get one for a lot less $$.
- Motor mount:e28 Transmission mount:e21
Some people on the board have reported problems with the E28 motor mounts. I personally am going with the mounts from Revshift. They are made specifically for the M/Sxx swaps. I have not seen anyone report any issues with them, and they're only about $40 more than E28 ones.
- Just the gasket for the oil pan because of switching e34 oil pan oil pick up
and dipstick
Not replacing anything else? Water pump & gaskets, throttle body gaskets, injector o-rings, etc? Never a better time than when the engine's already out of the car...
- For now I don't have the funds for the brake, but I'd like a full m3 brake .
Going 5-lug, then? You'll need to if you want to use the M3 brakes.
Are you going to keep A/C?
What Diff are you going to use?
Not sure on the ZF trans how the shifter carrier works on E30s.
Keep us posted!Leave a comment:
-
You bought the motor from Danny didn't you? I was going to buy that motor you big jerk.Leave a comment:
-
You just need to move the stock booster over a little right? Like, drill new holes and notch the center hole?Leave a comment:
-
Use the stock booster... easy and still works great. In for pics of car, s52, and girl?Leave a comment:
-
Brake booster - there can be only one.... IX (otherwise known as 735i dual booster).Leave a comment:
-
Hello! Welcome to the forum and best of luck on your swap.
Since you are local you can come drop by our shop and check out all the swaps that we have here at the moment.
S50 --> E30
S52 OBD1 --> E30 M3
FI 350 --> E30
Also if you have any questions or needed some random tools (vanos tools, pullers, holders, big wrenches, oscilloscopes) we can help out with that.
Also when the time comes we offer services to do the swap on sight with a lift, tools, help, hoists.
Just give me a call if you want to come or if you have any questions.Last edited by jrdeamicis; 08-04-2011, 01:09 PM.Leave a comment:
-
Not sure if anyone mentioned it yet, but plan on the entire swap taking about 5x longer that you'd expect.
Just trust me.......if you plan on things taking a while.....plan on them taking longer than you've already planned, lol.
You're never going to figure all the odds and ends out untill your fitting things together.
Good luck though!!Leave a comment:
-
also have danny help you out, he's easy on the eyes and has beautiful hair.......
Leave a comment:


Leave a comment: