dropped in a new trans and now it misses unless at WOT

[bloodshot-e30]

im gonna mess with my wiring tonight and have my handy dandy wiring diagram next to me and check every single sensor i have plugged in. lol

as for the maf and O2 nothing changes (atleast it didnt B4) also all that shits new.

plus it ran fine in my red car when i didnt even have an O2 at all. im starting to lean towards vanos problem. as for the miss in thinking coil pack.

[jrdeamicis]

What about unpluging the Vanos or the Cam?

If its vanos based, either of those will disable your vanos.

[bloodshot-e30]

im gonna do the vanos test when i have the valve cover off

i didnt notice that my cam sensor has the wrong color wires in the plug and only 2 of them and the crank sensor has the right colors... so im taking the intake off tomorrow and checking all the plugs!

[jrdeamicis]

Cam sensor only has 2?
It should be that your crank sensor has two wires
and your cam has 3

VR and Hall

[bloodshot-e30]

Cam sensor only has 2?
It should be that your crank sensor has two wires
and your cam has 3

VR and Hall

according to the wiring diagram i have for the ms 3.3.1 it shows 2 wires to the crank and they are the right colors. and the cam has 3 but the only plug i have left that isnt used thats plugged into the cam has a black and a clearish color wire in it.... so idk wtf is up with this harness taking the intake mani off today to check every plug...

[jrdeamicis]

They use an insulated clear ish wire for signal on a bunch of different engine managements.

You need to use continuity and find out what that connector is.

[samiam3356]

Continuity test is the best way to handle the wiring imo. Hope you figure it soon Josh!

[bloodshot-e30]

yea i was too damn tired last night after all the mowing i had to do and just watched a movie with the girl and passed out lol

but hopefully tonight or sometime today i have time to mess with it!

[bloodshot-e30]

i got it fixed last night and i gotta say i cant believe its been since november last year that i got to feel this thing pull like it should and its FUCKING titties!

[samiam3356]

you're a dick! :p

[bloodshot-e30]

how am i a dick sir :P

[samiam3356]

What fixed it?

[bloodshot-e30]

the knock sensor was plugged into the cam sensor and vise versa lmfao

[scottinAZ]

that will do it...... whoopsie

[bloodshot-e30]

yea that'll get er done haha but its runs strong like it used to :D