Announcement

Collapse
No announcement yet.

speed signal HELP!!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    speed signal HELP!!!!!

    Hello everyone, this is def one of the best and most helpful forums that I've dealt with in the years that I've been involved in my swap cars So here's my situation, I'm running a fully built s52 for boost on a 91e30m3 and now I'm at at the last phase of my high power turbo build...I'm running a AEM stand alone and I would like to do boost by gear/mph....has anyone done this on a e30 or does anyone know which pin i can tap into for speed signal for the AEM......Any help would be greatly appreciated as this will also somewhat take care of my traction issues lol
    sigpicBEST OF BOTH BOOSTED WORLDS

    #2
    the green plug on the back of the cluster is speed signal outputs.

    Check Us out on Facebook
    Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
    Full Product Line Tuning
    OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread

    Comment


      #3
      Thanx for the response, would you by chance know which wire it is? I'm assumming this is the signal that goes to the ecu in which in my case it would go to the AEM
      sigpicBEST OF BOTH BOOSTED WORLDS

      Comment


        #4
        Theres a wire coming outta the cluster for the cruise control. You can steal that one.

        Check Us out on Facebook
        Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
        Full Product Line Tuning
        OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread

        Comment


          #5
          You're the fucking man thanx a lot I really appreciate the quick responses what are the chances I can grab that signal from the c101 plug if so do you know which pin it is or do I have to go from behind the cluster
          sigpicBEST OF BOTH BOOSTED WORLDS

          Comment


            #6
            depending on your car it may be pin 14

            Check Us out on Facebook
            Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
            Full Product Line Tuning
            OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread

            Comment


              #7
              Hey buddy thanx alot figured it out with yer help;)
              sigpicBEST OF BOTH BOOSTED WORLDS

              Comment

              Working...
              X