Announcement

Collapse
No announcement yet.

24v question. need help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    24v question. need help

    almost have it up to run, just missing a little bit of information.




    I do not know what hose plugs into the side of 9 and also for 11


    also where does hose 3 and 5 go?


    thanks guys

    Patrick - IG:niicknac
    RIP 1987 BMW 325is - S50'd ZF 6-speed, flared, bagged

    #2
    9 goes to the ICV, (big turkey necked lookin fucker), small hose goes to the bottom of the oil separator on the valve cover (top front of the cover, 2 hoses, one here #5, other big one to the bottom of the intake boot #3 in your second drawing)

    11 goes to the fuel pressure regulator IIRC, however this one Im not sure on
    I saved 15% on my Bimmer parts by switching to ...



    Comment


      #3
      awsome man thanks

      Patrick - IG:niicknac
      RIP 1987 BMW 325is - S50'd ZF 6-speed, flared, bagged

      Comment


        #4
        Correct and correct.

        Check Us out on Facebook
        Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
        Full Product Line Tuning
        OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread

        Comment


          #5
          5 >small line on 9
          3>one of the lines on rubber intake, there are 2, and the other goes to the ICV

          Originally posted by Roysneon
          $5 shipped?
          Originally posted by MarkD
          You are a strange dude, I'n not answering any more posts from you.

          Comment

          Working...
          X