missing and shooting flames now...

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • bloodshot-e30
    replied
    alright i popped out the injectors and cycled the fuel pump and the injectors didnt leak any... and im gonna check for a short again later...

    any other ideas??

    Leave a comment:


  • bloodshot-e30
    replied
    ^^ where would i find such a short? i checked the wires in the harness once they were good, and it got a little better when i swapped back to my old injectors.

    FML this car is getting annoying...

    Leave a comment:


  • Adrian_Visser
    replied
    A short to ground on the ground side of the injector harness could cause this.

    Leave a comment:


  • bloodshot-e30
    replied
    no codes for any of the sensors though... just those 2 injector codes...


    and come on ryan whats the secret? ;)

    Leave a comment:


  • euro2fast4u
    replied
    i bet its a faulty sensor brand new sensor do come back bad sometimes

    Leave a comment:


  • rThor432
    replied
    ^^You probably don't want more fuel pressure than stock if you have enough unburnt fuel going through your engine to be dripping from the exhaust tip. Just saying. Sounds like it could be a lot of things. I would tell you where I'd start, but that takes the fun out of it for you. If you were in Charlotte with the car I would do one of two things-- fix it or burn it to the ground. Either could be fun for one of us.

    Leave a comment:


  • bloodshot-e30
    replied
    all sensors are brand new OEM and that was my next thought the harness... ill try one of my other FPRs though.... would a 4bar fpr be too much to try cuz i have a few of those laying around.

    Leave a comment:


  • nrubenstein
    replied
    Might want to check other critical sensors. CPS, for example. Worst case, you'll want to start checking the harness for continuity.

    Leave a comment:


  • bloodshot-e30
    replied
    hhahah yea a lot of ppl ask me how much boost im running

    Leave a comment:


  • FunfGan
    replied
    Flames are bad-ass. Just saying.

    Leave a comment:


  • euro2fast4u
    replied
    seriously though, i need one bad and mike is hording one in pa just no way for me to get up there and get .... actually you should cut it off tomorrow before it gets freezing again and hide it. then when you come and get the dme we can swapzies

    Leave a comment:


  • bloodshot-e30
    replied
    lol alright ryan i got u.

    Leave a comment:


  • euro2fast4u
    replied
    dont worry in a few days youll have a known working 326k DME just cant break it or ill kill ya but you should cut off that rear valance and put it on hold for me

    Leave a comment:


  • bloodshot-e30
    replied
    dude i come right now if i could... lol
    im losing my mind chasing this... my red one NEVER had any of these problems.

    Leave a comment:


  • nrubenstein
    replied
    If you're ever in DC, I'd be happy to let you try one of mine.

    Leave a comment:

Working...