Soon I'll be swapping in an m52b28 into my 91' 318is. I'm using the getrag 240 with the m20 single mass flywheel. Can someone explain to me why I must use the euro tob when it seems to have the same part number as the 325i?
-
-
Throw out bearings from left to right
E21 323, E30 318IS, E30 325i
If you want to maintain your clutch pedal engagement point you need to use the euro 323 bearing with your setup.
This is the number for it btw: 21511204525
Ref: http://realoem.com/bmw/showparts.do?...66&hg=21&fg=05 -
Some places list it the same as the 325i so make sure you buy it from blunt : p
Comment
-
Throw out bearings from left to right
E21 323, E30 318IS, E30 325i
If you want to maintain your clutch pedal engagement point you need to use the euro 323 bearing with your setup.
This is the number for it btw: 21511204525
Ref: http://realoem.com/bmw/showparts.do?...66&hg=21&fg=05
Thanks a lot for posting the pic! It gets frustrating reading from one post to the next where some say you need the euro tob and some say you don't. $75 on pelicanparts! damn!Comment
Comment