ok so ive searched and searched then searched google and nothing. I was wondering if anybody knows what hoses to use for a m42 and m50? What cars did yall get yours from? ill keep searching till someone answers this but any help will be greatly appreciated.
-
" I'm not racing, I'm driving asshole"
:hitler: Das Führer -
You can use a dayco D 70440 on both hoses. It will have to be trimmed down and you have to stretch it over on one end but it will work.1989 325i Alpine s52 coupe
2003 540i M-Sport 6 speed
2003 X5 3.0 -
do they crimp bad?" I'm not racing, I'm driving asshole"
:hitler: Das FührerComment
-
Not at all. Its just an L shaped hose. Trim down both sides of the hose til it fits perfect.1989 325i Alpine s52 coupe
2003 540i M-Sport 6 speed
2003 X5 3.0Comment
-
cool dude thanks alot" I'm not racing, I'm driving asshole"
:hitler: Das FührerComment
-
The top one should be from a e34.. The bottom is the same e36/e34
Go to advance and have them show you both,then you will seeNASA
BMWCCA member
PCA member 25yrs
1991 318IS slick top
1997 M3 sedan
2001 325CI DD
“whoever turns the wheel the least, wins"Comment
-
It's easier to just go to a shop with the dayco hose numbers and get those. When you start asking for car specific you get into different years, some shops screw up, etc.Comment
-
i ended up using the Gates #21200, it was 13 bucks and i used one hose for top and bottom not crimped or anything." I'm not racing, I'm driving asshole"
:hitler: Das FührerComment
-
I went to Napa and got an E34 hose, and cut down the ends until it fit. Works perfectly.
Pic for reference:
Comment
-
I just Emailed Blunt, and he sent the ones I needed. I got no clue what the hell they are for, but they fit, and that is all I care about.I saved 15% on my Bimmer parts by switching to
...
Comment
-
janderson your engine bay is so fn clean
" I'm not racing, I'm driving asshole"
:hitler: Das FührerComment
Comment