Crank sensor
help me diagnose
Collapse
X
-

Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread -
I have a few new ones. Or blunttech or w/e. no its on the front of the motor
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno ThreadComment
-
gobuffs asks because if you do have spark and the ohm reading from the cps sensor is over 500 it is not your cps. If you still assume it could be, just for continuity between the pins to the ecu.
SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]Comment
-
Its not the fusable link.
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno ThreadComment
-
-
fuel filter was changed under 5k miles ago when swap was done on the car.
fuel tank was drained of sediment and all that happy horse shit.
order the part from my local guy, got it today. will install tomorrow.
IF it still doesnt run, it is going on a trailer and i am trading it for a running 318is vert.Comment
-
Devon, Ask your mechanic to explain to you how the BMW engine management system works. In particular , ask him what information the DME requires from the various engine sensors at the time that the key is in the "START" position.
If he is correct, It may well help you both ;) , and we can receive feedback.
mComment
-
Will do!
Update, got ready to try a new cps, went to put it in and oh no, it has a male coding plug, where as the old sensor had a female plug!
Called BMW and they said they feel it was a packaging error but to bring it in and they will figure it out....ugh rediculousComment
-
Seriously? You're going to go through all of the work to have a swapped car, and as soon as something goes wrong just dump it? Have fun sorting out another e30...88 325is - S52 powered
Originally posted by King ArthurWe'll not risk another frontal assault, that rabbit's dynamite!Comment
-
THIS! I logged in at work just to post this. I would enjoy the car since all it was was a damn crank sensor. Not a big ordeal at all. That could have happened on any car.
Comment

Comment