What DME for S50 Block with NVM50 Head with Cams

[PeteD]

Has anyone had any experience wiring/tuning an NVm50 head (with cams from Pete McHenry) mounted to an s50 block?

Here is the back story:

http://www.r3vlimited.com/board/showthread.php?t=224324&highlight=buying+hella+headlights

Thanks!

[bpmack16]

Pete post it in General Discussion and if they don't like it they will move it back.

[Teaguer]

I would imagine with a NV head you are running the NV harness so go with the NV 402 DME and have a custom chip burned for the cams and displacement/compression increase.

[scottinAZ]

I would imagine with a NV head you are running the NV harness so go with the NV 402 DME and have a custom chip burned for the cams and displacement/compression increase.

This would be my feelings as well. Otherwise the DME will be looking for equipment that isnt there, namely the Vanos

[PeteD]

Thanks guys! I'm hoping I can sort this out without spending too much money.