Help! - Need a Thin Fan

[Slovik]

Just put my after market e36 radiator in yesterday and I only have about 1.5 inches from the radiator to the threaded nose of the water pump. I would like to run an electric fan and I can offset it a bit. What are you guys running and where did you get it. I am assuming that the e30 325 clutch fan won't fit, is that correct? The car is a 91 318is w/s52 engine.

Thanks,

Seth

[drez14]

i used this 12 incher in front of my Mishimoto e36 radiator.

http://dnamotoring.com/store/index.php/cooling/radiator-fans/12-pull-push-slim-radiator-12-v-electric-fan-black-mounting.html

I had to mount it more towards the drivers side of the radiator and trim some of the plastic so that i didnt hit my fan delete nut

[328ijunkie]

Just put a pusher in there.

[325e10]

I put a 16" pusher in place of the stock Aux fan. Works great.

[Slovik]

I like the idea of just running a pusher, I have a/c and it's real hot down here, is the just a 16" still the way to go. Which ones are most effective?

Thanks,

Seth

[e30 s52]

just change the thermostat and switch and use us auxillary fan....eliminate the clutch fan

[bubbajan21]

i like the idea of just running a pusher, i have a/c and it's real hot down here, is the just a 16" still the way to go. Which ones are most effective?

Thanks,

seth

spal