24v, iX booster, What resevoir for the m/c?

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • xwill112x
    Θέλησα έναν τίτλο συνήθειας, απορροφώ για να είμ&#
    • Jan 2009
    • 4237
    #1

    24v, iX booster, What resevoir for the m/c?

    Stock wont fit ...ebayed around a bit for a remote mount..didnt see any good options. What are you guys running ?
    sigpic
    Tags: None
    • Ryane30guy
      Member
      • Aug 2011
      • 54
      #2
      Large Brake Fluid Reservoir, Dual 5/16 Push-On | Pegasus Auto Racing Supplies
      https://www.pegasusautoracing.com/productdetails.asp?RecID=1120
      This large (10 oz) brake fluid reservoir has two outlet nipples to accept 5/16" feed hose. An internal barrier separates the two chambers so a leak in one side won't drain the reservoir.

        Comment

        • Bmwmotorm52
          Advanced Member
          • Mar 2009
          • 145
          #3
          This only has two plugs for front/rear brakes.What did you do for clutch reservoir?
          Originally posted by Ryane30guy
          https://www.pegasusautoracing.com/pr...asp?RecID=1120
          sigpic:):)

            Comment

            • tonytony
              Knee deep in poopie
              • Jan 2004
              • 3498
              #4
              DSM remote resevoir and nipples, and m5 remote clutch resevoir, or maybe it was from a 2002, I can't remember, been too long. But i know for sure I used the DSM remote resevoir

                Comment

                • Gooch
                  E30 Mastermind
                  • Dec 2006
                  • 1674
                  #5
                  Mount the booster without the spacer and the iX res stock will fit.

                  '91 318is - OBD-II S52 swapped - E30 M3 5-lug - 5x120 BBS RC090 (E39 Style 5) - TCK D/A coilovers 550/700 [SOLD]
                  '87 535i - Vacuum brake conversion [SOLD]
                  '93 525iT - 5-speed swap - 320k and counting
                  '09 328xi - 6-speed

                    Comment

                    • ScHpAnKy
                      E30 Mastermind
                      • May 2009
                      • 1573
                      #6
                      2002 reservoir works quite the bitch, part# is:

                      34 32 1 112 399

                      91 318i | 87 535iS

                        Comment

                        • MaksV
                          E30 Enthusiast
                          • Oct 2010
                          • 1042
                          #7
                          2002 tii res is best.
                          CHEAP REBUILT INJECTORS




                          Need Quality Brakes? BimmerBrakes has it!
                          For anything Else go with BluntTech!

                            Comment

                            • e30s50dan
                              R3VLimited
                              • Nov 2008
                              • 2076
                              #8
                              E34res IX booster no spacer...will clear mani !
                              NASA
                              BMWCCA member
                              PCA member 25yrs




                              1991 318IS slick top
                              1997 M3 sedan
                              2001 325CI DD

                              “whoever turns the wheel the least, wins"

                                Comment

                                • surebimmer
                                  E30 Modder
                                  • Jan 2004
                                  • 978
                                  #9
                                  Originally posted by tonytony
                                  DSM remote resevoir and nipples, and m5 remote clutch resevoir, or maybe it was from a 2002, I can't remember, been too long. But i know for sure I used the DSM remote resevoir

                                  I'm using that same setup. DSM reservoir and nipples. Got them at the junk yard for cheap. Been holding up for 3 years now.

                                    Comment

                                    • tonytony
                                      Knee deep in poopie
                                      • Jan 2004
                                      • 3498
                                      #10
                                      Originally posted by surebimmer
                                      I'm using that same setup. DSM reservoir and nipples. Got them at the junk yard for cheap. Been holding up for 3 years now.
                                      troof been holding for me since 2006!

                                        Comment

                                        • GunMetalGrey
                                          E30 Fanatic
                                          • Dec 2010
                                          • 1499
                                          #11
                                          Where are you guys putting your clutch res lines too?

                                            Comment

                                            • tonytony
                                              Knee deep in poopie
                                              • Jan 2004
                                              • 3498
                                              #12
                                              Originally posted by GunMetalGrey
                                              Where are you guys putting your clutch res lines too?
                                              what do you mean? connect to the clutch master cylinder from the resevoir, or use a T from one of the brake lines to the clutch master cyl

                                                Comment

                                                • GunMetalGrey
                                                  E30 Fanatic
                                                  • Dec 2010
                                                  • 1499
                                                  #13
                                                  Makes sense, was not thinking before lol.

                                                    Comment

                                                    • etxxz
                                                      R3VLimited
                                                      • Feb 2006
                                                      • 2085
                                                      #14
                                                      Originally posted by Gooch
                                                      Mount the booster without the spacer and the iX res stock will fit.
                                                      x3
                                                      No more e30s for me.
                                                      88 black BMW OBDII 332is dedicated track [sold]
                                                      88 BMW OBDII bronzit 332is [RIP 03/08]
                                                      91 BMW 325i [sold]
                                                      86 Corolla 'Ae86' HB 20v trd [sold]
                                                      http://youtube.com/watch?v=pTj7Hn9v5Rs

                                                        Comment

                                                        • GunMetalGrey
                                                          E30 Fanatic
                                                          • Dec 2010
                                                          • 1499
                                                          #15

                                                          Why is my booster so close? I am running the Spacer, but most people say that is not an issue. And to take out the spacer you need to drill a new or two new holes.

                                                            Comment

                                                            Previous 1 2 template Next
                                                            Working...