Announcement

Collapse
No announcement yet.

AKG wiring info

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    AKG wiring info

    http://www.akgmotorsport.com/e30convpins.html

    I am in the process of making my adapter now and I was wondering if this site works for all cases? For the most part most of these have been the same color but it tells me to use pin number 9 for engine speed. But when I scroll up it also says pin number 9 is not used. ( I also don't have anything for pin number 9) why does it show contradicting info? Can I continue to match the wires bases on colors?
    Tags: None
    #2
    Okay so I have narrowed my last few wires left on the e30 plug to:
    2 = Oil level sensor pin 1
    10 = Oil level sensor pin 2
    16 = SRS connector/diagnostic connector #6 not used
    According to the AKG chart. I will keep looking and maybe I will be able to answer my question.

    Edit - Wait never mind. It says not used because I do not need it for the swap. Wow, derp
    :stupid:

    Comment

      #3
      Don't use akg chart, no bueno.

      Comment

        #4
        Talk to dave at market motorworks. He has the wiring down.
        Past Car : E30 S50 6 Speed 5 Lug 3.73
        Current : Z3 S50 OBD2 (Smog Legal) 6 Speed BBS RN Dual Ear Diff
        ___________________________________________
        BNB Designs
        Engine Swaps, Fabrication, Innovation, General Repair
        Richmond CA
        Julian 848-248-8029

        Comment

          #5
          AKG chart=no good.


          Julian you get that chip?

          Check Us out on Facebook
          Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
          Full Product Line Tuning
          OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread

          Comment

            #6
            the akg chart wasnt right for me. nor was it even complete. i got a etm for the motor and the car and went to town. looking for every x20 and c101 connection i found. and had no issues at all. the pin numbers a re going to be more important than the wire colors. if you do enough searching on here someone has probably posted a chart on here that will work for you. the eta charts are hard to find. i have a 86 es that i put a s50 in and then you need the c104 connector under the dash also. but search and you shall find. just not akg

            Comment

            Previous template Next
            Working...
            X