m50 won't start, its not getting fuel

[KillaCam]

i have a early model c101 (i think thats what they call it ) clip, 1984 (to be exact) and i did some searching for the wiring to the x20 clip and i found some info. so i wired it up the way i think is right but the fuel pump is not working. and yes the fuel pump works. but its not coming on..

the pin number from the early c101 clip is 7 and the pin for the x20 clip is 13. and i connected them and nothing. idk what is worng.

LMK if you guys have an idea. and the early 84/85 c101 is different then the 86/87 one. FYI so its not 13 to 13

[KillaCam]

so i have no spark and no gas pump... what is the problem!!! :hitler:

[joecassie]

did you ever take the wiring harness off the motor

[KillaCam]

did you ever take the wiring harness off the motor

no but i did snip off all the auto bits... idk if i cut anything important. . . but i don't thik i did.

i have been doing a lot of searching and it is either not hooked up right, not grounded, or ecu is bad

[KillaCam]

fixed it...... just for reference... for cars that are 1985 1984 the wire that is blue and yellow needs to be tied to the wire that is pin # 22 for the e36 x20 thing

[Roysneon]

Damn, good to see you got it fixed up, I meant to check my EricT adapter to see what was connected on it for you.