help identify plug

[chrisbmx68]

m50 nv

round plug is clearly the maf, the small 2 wire one i have no idea? its taped up close to the maf plug so it cant go to anything much further away. Any help is appreciated.



wire colors for the maf and 2 prong dealie

[chrisbmx68]

just found this sweet diagram which seems to indicate its for the charcoal canister purge valve, which i supposes makes sense

[Slovik]

Most likely the plugs into the charcoal canister valve which is usually on a bracket next to the diptick tube.

[emmanuel.dlc]

yes, its the charcoal plug

[Roysneon]

Jesus Fuck, whoever drew that diagram deserves one hell of a high five.

[brianao34]

Bump for that bad ass diagram. Been looking for one of those
Thank you so much

[Slovik]

That is a great diagram!!! Just wondering where the connector is for the secondary air pump, could it be on the upper right where he puts intake temp sensor as he has one marked for that on the bottom of the diagram.

[brianao34]

Diagram is for VANOS OBD1, no secondary air pump.

[Slovik]

OK thanks, was not aware of that.

[Classicoe30]

Sweet diagram!! All of the above are correct! Charcoal canester to valve!!

[PutterMcGavin]

Old but bump for a damn good diagram! Should be a sticky. Definitely helped me with my non-labeled S50 harness!

[gath]

Thumbs up! for a very helpful drawing.
Can we have it as a sticky.

[Poorboyz]

Jesus Fuck, whoever drew that diagram deserves one hell of a high five.

Lol, I completely agree. I saved the diagram as soon as I saw it. Def took someone a lot of time to do that.

Sent from my Galaxy Nexus using Tapatalk 4

[SmokeE30]

just found this sweet diagram which seems to indicate its for the charcoal canister purge valve, which i supposes makes sense

That's fuckin boss