helpp with this connector

[kelzzrocka]

hey r3v! i need help , theres a connector that i have no idea where it goes, does anyone have an idea or knows where this connector needs to be connected too?(im holding the connector) it runs right next to the MAF. i was thinking maybe it needs to connect to the temp sensor?? and my cluster temp gauge isnt working so thats y i think it connects to the temp sensor .plz help.



Uploaded with ImageShack.us



Uploaded with ImageShack.us
thanksss

[bzboardz]

I believe its for the evap emissions valve. pull back the boot and check the color of the wires....BRN RED/WHT

[kelzzrocka]

yeah its a red&white wire and a brown wire....where does that go?can i just leave it unplugged?

[M3PO]

Not if you need to pass some kind of inspection that requires all of the original smog equipment from the E36. You will get a CEL for evap. You need to get an E36 evap valve and plumb it into the E30 evap system (or leave it dangling if the inspector doesn't care and you only want to get rid of the CEL).

[10Toes]

What are you holding a jelly fish?

Probably Evap purge valve.

[kelzzrocka]

Not if you need to pass some kind of inspection that requires all of the original smog equipment from the E36. You will get a CEL for evap. You need to get an E36 evap valve and plumb it into the E30 evap system (or leave it dangling if the inspector doesn't care and you only want to get rid of the CEL).

thank you good to know.

10toes- lol my gloves always tend to rip (costco brand)