E30 M50 Heat shield for CAI

[SchnellerVert]

Would you mind telling me what other location the later e30's had the ABS pump in? :loco:

so they relocated it.

[permit]

That is true...forgot about that.

BMP Design made a all aluminum box like that for the air intake, and the oil cooler. They seem to do a lot of research, so I do not think that its that ineffective being aluminum and all.

Hold a piece of aluminum in your left hand, hold a piece of ABS plastic in your right hand. Apply a flame to both, and tell me which one you let go of first.

[parkerbink]

My 90's abs pump be there.

[Jordan]

It won't work for early cars due the ABS pump is in that location.

Would you mind telling me what other location the later e30's had the ABS pump in? :loco:

[SchnellerVert]

That's nice. It won't work for early cars due the ABS pump is in that location. Glad to see others doing some thing differant here than the normal.

[Sean]

here's an aluminium one that I have made for my M42 - should work with an M50 as well. (it had better or I will be pissed off)

Just had to let you know, that airbox looks BADASS! :D

[Pettas]

BMP Design made a all aluminum box like that for the air intake, and the oil cooler. They seem to do a lot of research, so I do not think that its that ineffective being aluminum and all.

[permit]

Pretty good, not sure about the aluminum though, especially with the filter right next to the radiator/hose. It'll fit with the M50--if you use that same radiator.

[gjuu]

here's an aluminium one that I have made for my M42 - should work with an M50 as well. (it had better or I will be pissed off)

[SchnellerVert]

I have no faith in late model BMW radiators. Sad that the factory continues to produce those pos. I am suprised that no one filed a class action suit over them.

[permit]

Gave up the ghost...my previous radiator was a stock M42 one, if that helps. Now its a stock 525i radiator.

[SchnellerVert]

So your previous radiator gave up the ghost? What style are you using now? A powerrr like Ryan? or a Griffion like the one in this Alpina B6

[permit]

You have the external tank. No gift for you!

[DEV0 E30]

That would make a good xmas present for me, thanks.

[permit]

Glued together with JB weld and reinforced inside with 90° angles of ABS.