Parts for M52 swap?

[e30ryan///m3]

Hi Everyone,
I really would like to do an M52 swap in my 90' 325iC. I did a search but didn't really find what I was looking for. I really want to know if anybody has a list of parts that I will need to complete my M52 swap. This would include every part used in the swap. I know I will have to convert to OBD I but is there an easy way to do this or do I have to re-wire the entire harness? Any help is greatly appreciated.


Ryan

[325Projectz]

Its your new best friend

[FredK]

The parts for the swap are the same as the regular M/S50 swap. Oil pan, dipstick, oil pickup, E28 535i engine mounts, etc. Check the thread at the top for a parts list.

For the OBD-I conversion, check http://homepage.mac.com/aceves/OBDI/OBD_ONE1.htm

Essentially you switch over OBD-I parts like ECU, harness, intake, fuel rail and coils, and coolant return hose (which you'll need a fitting that you can get at Turner Motorsport or Active Autowerke).

Good luck!