Clutch Hydraulic Line

[Beej '86 325es]

To the guys using the E36 transmissions...

Can you reuse the E30 clutch hydraulic line? Do you reuse the E30 clutch slave cylinder?

I ask because I'm using my E30 260 tranny, but bent the line up good when pulling the engine. The UUC upgraded line is cheaper than the factory replacement, but UUC does not list an E30.

http://www.uucmotorwerks.com/ss_clutch_lines/

[Addissimo]

If you're using the e30 tranny- use the e30 slave- the e36 wont fit without modifying the transmission. As far as the clutch line- They're the same fittings, and you'll have to bend the e36 one most likely anyway- I dont know what the length difference is.

[KangamangusDriver]

I believe they slaves are identical. Yes you can use the same clutch line