Interest in full M/S5x swap harness

[sumoashe]

Had a customer back out of a harness order. Already have most the parts needed to complete and want to offer it up here before I start piecing it out for other projects. Specs are as follows:

Plug & Play M/S5x to e30 swap harness, ecu to c101 full harness, not a adapter. 100% new parts.

All new connectors and pins, including bosch 88 pin ecu connector.
Mil spec wire (M22759/32)
Expando FR+ sleeving (most companies i.e. rywire/chasebays use expando xt, I use FR+ because it takes higher temps)

Cost is right about $600

Would prefer someone in chicagoland area for vehicle access. But can do it blind if provided your M/S5x harness for mock-up. Harness will not be damaged in any way, and returned to you.

P.S. Is it still possible to buy new c101 connectors? I can get the pins all day, but been some years since I bought the actual connector.

[sumoashe]

Well ecu connector is sold to friend with a pectel run time attack car. And wiring has gone to that and a fsae team. But if someone is interested in this, the parts are something I either stock or can get from one of my suppliers quickly. So it can be done again.