Clutch PROBLEM..NEED HELP

[drummerchubbs]

I have a M50nv with a zf320 trans, DMF, LuK clutch and pressure plate. My clutch is not gripping to the flywheel! The car barely moves on its own power.

I have the flywheel resurfaced and the clutch and pressure plate are brand new.

1 week ago I had a slave cylinder explode inside the bellhousing and leak all over the place. Can this cause the clutch to be contaminated so much that it won't engage?

Also, I replaced the input, out put, and selector seals.

Please let me know what you think?

[justin_l_]

Oil soaked clutch can cause this, also having the flywheel resurfaced with the wrong step can cause issues.

[drummerchubbs]

Oil soaked clutch can cause this, also having the flywheel resurfaced with the wrong step can cause issues.

Contaminated clutches should be tossed out right?

[drummerchubbs]

Guess what!?! The pressure plate that I had was off another model. Auto Heaven figured it out and I drove the car today :)