Have a MMW->TRM/Technica ECU flash?!! New release!
Collapse
X
-
Sorry about that. Were not currently doing OBD1 and dont really plan to, sorry... -
-
Dave, what's the turnaround time going to be if we send in an ECU?
edit: I have a TRM flash/tune by way of you and RobertK, and it does this:
As far as the cold start idle goes, some of the tunes others sell already have it deleted others dont. Basically for the first few min the car is running depending on temp not only does the car bump the idle up at first but it also turns the vanos on slightly as well as obviously attempts to fire the SAP. I basically turn the map down/off that tells it to do that and you get rid of that lumpy roughish cold start idle. You OBD2 guys that dont have it deleted with loud exhausts will really notice as you can hear the exhaust note change significantly after the car as run for a few min.Last edited by agent; 01-10-2014, 07:43 AM.Leave a comment:
-
How much are you charging for flashing for a 24v swap? No performance upgrades, or M50 manifold. Just getting rid of SAP, EWS, rear O2s, etc. i havent gotten rid of the muffler flap or evap... i suppose ill learn how to do that later.Leave a comment:
-
My car definitely does that and I hate it. I also misplaced the little electric valve for the secondary air pump so I get a CEL every once in a while because it's not plugged in.Leave a comment:
-
Don't hesitate to get this tune by dave, he was very helpful with getting my DME reflashed ( I had previous codes for sap valve and running loses valve ). Great guys to deal with and keep in mind that they've invested alot of time and money into this so don't be afraid to tip them, I did just for the great customer service!Leave a comment:
-
If one has a e36m s52 car and deletes the air pump its pretty noticable
Sent from my SAMSUNG-SGH-I337 using TapatalkLeave a comment:
-
Will post up pricing later today.
As far as the cold start idle goes, some of the tunes others sell already have it deleted others dont. Basically for the first few min the car is running depending on temp not only does the car bump the idle up at first but it also turns the vanos on slightly as well as obviously attempts to fire the SAP. I basically turn the map down/off that tells it to do that and you get rid of that lumpy roughish cold start idle. You OBD2 guys that dont have it deleted with loud exhausts will really notice as you can hear the exhaust note change significantly after the car as run for a few min.Leave a comment:
-
Dave, could you post up more information about the OBD2 cold start idle? Or a link? Thanks.Leave a comment:
-
I'm curious as well. Are you going to be offering a cable to flash it ourselves like technica does? Remote tuning is nice vs sending an ecu every time for a reflash.Leave a comment:
-
He obviously didnt tell you. You need to contact TRM about the chip (ali provided). I troubleshooted it already that the chip was the problem.Leave a comment:

Leave a comment: