rewiring the engine harness

[e-dirtym52]

i'm cleaning up my wiring harness and rewiring my c101. i can't remember what wires went where but all of my wire colors on the body side are different than what i can find. so is the pin assignment still the same if the wire color is different than what i can find? such as how pin 14 is typically black/white and mine is a blue/yellow?

here is the pins for the body side c101:
1. blue
2. blue/black
3.-
4. brown/violet
5. black/brown
6. green/yellow
7. green
8. yellow/white
9. black
10. violet/green
11. white/blue
12. brown/black
13. violet/red
14. blue/yellow
15. black/green
16. white/black
17.-
18. black/yellow
19.-
20. red/yellow

any info helps on what which wire is what. thanks

[e30rapidic]

have you looked through the ETM for your year?

http://www.wedophones.com/BMWManualsLead.htm

[e-dirtym52]

I have it up on my computer now. I just haven't had the time to look through it and was hoping someone could have some answers on here. Plus I'm not very savvy with that stuff.

[justin_l_]

What exactly are you rewiring? Redoing an adapter or redoing the body side of the c101 itself?

[M3PO]

Mine where almost all different colors than what most people listed but served the same function which is why you gotta go by pin number.

[e-dirtym52]

i'm redoing the engine side. the body side wires are different than what usually comes up but if the pin numbers serve the same function then that's all i need to know. but engine side comes from an e34 525i and i lost how i pinned it before and my mistake i didn't write down how it was before i took the pins out