Announcement

Collapse
No announcement yet.

Tranny failure? help plz!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Tranny failure? help plz!

    Yesterday I went for some "spiritual" driving and today when I drove the car again I noticed of a metallic noise down on my transmission.

    However,the noise stops when I step on the clutch and comes back when I release it.

    I do sometimes have troubles to get the car in gear when is stopped in a red light for example,but not when is running.

    Do you have any idea of what could be? needed to say that the clutch has less than 1500miles and the tranny was refilled with new oil gear when the clutch work was done,but the TOB and the transmission input shaft were not lubed

    I'm running a m50 swap with m20 Clutch/flywheel aseembly and a g240.

    Thanks in advance!
    “Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”
    ― Jeremy Clarkson
    Euro 318is M50 build thread

    #2
    Sounds a bit like the Getrag rattle caused by the input bearing. Google it and see if it matches what you're hearing.

    Comment

    Working...
    X