e30 M50 Swap Throttle Cable

[CrankYankers]

I have the e34 throttle cable for the m50 swap in my e30. Well we rigged up the end of the throttle cable to the engine. It snapped on us, so I need to understand how this is suppose to attach to the engine side. I've looked at realoem.com and other diagrams and I can't figure out the parts I need in order to connect the throttle cable to the engine.

Any help would be appreciated.

Thanks!

[mpowerful]

There is a rubber grommet that goes through the stationary bracket on the throttle body. The cable end has a plstic clip that goes around the cable and the cable stay metal cylidnder snaps into it. That plastic pieces then snaps into the square hole on thebthrottle itself.

[SmokeE30]

you usually have to adjust the cable to the max and bend the brackets on the TB a little bit to get it to work as well.

[JRKOUPE]

you usually have to adjust the cable to the max and bend the brackets on the TB a little bit to get it to work as well.

after years of reading about 24v swaPS...


this is the first time I ever read this....
and its exactly what we did....



works great.