Announcement

Collapse
No announcement yet.

PNP Adapter Harness Wiring for m50, m52, s50, & s52 (And MORE!)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ba114
    replied
    Do you do harnesses for:
    '89 318i (M40b18) adapted to M52 with M50 intake?

    Shipping to Australia required.

    Thanks

    Leave a comment:


  • sweet3
    replied
    Originally posted by schmidty View Post
    I'll definitely jump on this when I'm a little closer to getting my m52 installed.
    Do I need to send you the harnesses or do you use your own?
    Excellent, just send me a message whenever you are ready.

    If you want your harness repinned, then you would need to send your own harness.
    If you would just like the adapter harness (like the pictures above), then you wouldnt need to send me your harness.

    Leave a comment:


  • sweet3
    replied
    Originally posted by NotJesus View Post
    Do only the 'e' models require that you run the tach, mpg, and speed signal through the harness?
    No, there are actually some 87 "i" models that use them as well. An easy way to tell is if you see a 3 pin connector (c104) in your glovebox area. Pin 1 should be black, pin 2 should be red/green, and pin 3 should be yellow/white. If you have this connector, then you will need the extra wires.

    The extra wires are included with the harness (if your model requires it)

    Leave a comment:


  • schmidty
    replied
    I'll definitely jump on this when I'm a little closer to getting my m52 installed.
    Do I need to send you the harnesses or do you use your own?

    Leave a comment:


  • NotJesus
    replied
    Do only the 'e' models require that you run the tach, mpg, and speed signal through the harness?

    Leave a comment:


  • CENTURION
    replied
    I think I just bought one from you recently. it's on my build thread. letthebasskick04?????

    Leave a comment:


  • PNP Adapter Harness Wiring for m50, m52, s50, & s52 (And MORE!)

    LIFETIME warranty on workmanship with proof of purchase.
    Want to get your swap finished quicker? These adapters will save you a lot of headaches and hassle.
    All crimp terminals and wiring are new.
    Usually takes 1-2 days for tracking depending on your harness selection.


    http://www.redline-motorsport.com
    You can reach us at: sales@redline-motorsport.com

    All additional options are included in the prices. All standard relays and fuses are included (With an exception of the S54/S62 EKP Module)

    Radiator/Auxiliary fan wiring is now available. This wiring is intended for the E30, E36, or E46 original auxiliary fans. The E30 and E36 fans will need to be used with the 88/80c radiator temperature sensor, part# 61318361787.
    If you have another option in mind, contact us to see if we can provide a harness for your setup.


    ECU Tuning
    $70 shipped or FREE with a harness.

    EWS deletes available for the following:
    . M52TU (MS42)
    . M54 (MS43 B22, B25, or B30)
    . S54 (MSS54 or MSS54HP)
    . S62 (MSS52)

    Additional options:
    . Secondary Air Pump Delete
    . Rear o2 Delete
    . Top Speed Delete
    . VSS removal
    . RPM adjustment
    . Rev limit adjustment

    . Sport Mode Memory
    **Some options are only available for some ECUs.


    You will just need to send us your ECU to be modified.

    --------------------------------------------------------------

    M50, M52(single vanos), S50, S52
    $175 shipped
    *If you plan to use the E39 obd2 harness for the M52(single vanos), please let us know beforehand.

    These include the following options:
    . • OBD1 or OBD2
    . • Cluster Temperature Wiring
    . • c104 Wiring (82-87 models)
    Options:
    . • Oil level sensor wiring
    . • A/C input wiring
    . • ABS power wire if you have a 90+ model
    . • Oil temperature wiring if you have an e30 M3 or the e30 M3 cluster
    . • OBD2 diagnostic ports are available as well for the M52 and S52 engines (Special request)
    . • CEL Wiring (Special request)

    --------------------------------------------------------------

    M52TU, M54, S54, M62TU and S62 **The ECUs that are able to be used with these harnesses are the following: MS42, MS43, MSS54/HP, ME7.2, MSS52**
    We can make these for the E46, E39, or Z3M harness.
    $350 shipped

    These include the following:
    . • Cluster temperature wiring
    . • Fuel pump relay wiring (The S54 and S62 typically use Pn# 61357892976. If you rather have a standard relay, please let us know so that we can make that change)
    . • OBD2 diagnostic port
    . • Sport button for the S54 and S62
    . • Electronic pedal connector for the M54, S54, M62TU, and S62
    Options:
    . • CAN-bus wiring for gpeterson's unit (You will need to contact him for a unit)
    . • SAP relay and wiring
    . • Oil level sensor wiring (Except S54, M62TU, or S62) *Unless you request it*
    . • ABS power wire if you have a e30 1990 and newer models
    . • Oil temperature wiring if you have an e30 M3 or the e30 M3 cluster

    EWS must be deleted from your DME.

    --------------------------------------------------------------

    M60, M62 obd1 converted
    $180 shipped

    These include the following options:
    . • Oil level sensor wiring
    . • A/C input wiring
    . • ABS power wire if you have a 90+ model

    --------------------------------------------------------------

    M62 (Post 97) (Intended to be used with the ME5.2.1 ecu, part# 1437284) (5 ECU plugs)
    $275 shipped

    These include the following:
    . • Cluster temperature wiring
    . • Fuel pump relay wiring
    . • OBD2 diagnostic port
    Options:
    . • ABS power wire if you have a e30 1990 and newer models
    . • CAN-bus wiring for gpeterson's unit (You will need to contact him for a unit)

    These DO NOT include A/C wiring.
    EWS must be deleted from your DME.

    --------------------------------------------------------------

    M62 (Pre 97) (Intended to be used with the 474 ECU, Bosch ME5.2) (1 single ECU plug)
    $225 shipped

    These include the following:
    . • Cluster temperature wiring
    . • Fuel pump relay wiring
    . • OBD2 diagnostic port
    Options:
    . • ABS power wire if you have a e30 1990 and newer models

    These DO NOT include A/C wiring.
    EWS must be deleted from your DME.

    --------------------------------------------------------------

    Benchflash harness for MS42, MS43, MSS54/HP, and MSS52
    $45 shipped

    We do offer an ECU benchflash harness to reflash your DME outside of the car.
    It will come with instructions and links for the necessary software.
    It is intended to be used with any 12v power supply. It is suggested to use one that only reaches 5 amps maximum. Otherwise, I suggest to add a fuse to the (+) terminal on the benchflash harness.
    You will just need to get a Galletto 1260 cable and/or the INPA K+DCAN cable. These options are explained in the included instructions.


    For pictures, please refer to the website. We are continuously adding to our website.
    http://www.redline-motorsport.com


    We can make adapters for the E21, E28, E30, E34 and E36 chassis.
    We can make some wiring kits for the E46 and E39 chassis.
    We can make wiring kits for the E9, 1602 and 2002 chassis.
    Last edited by sweet3; 09-18-2019, 09:33 AM.
Working...
X