Hi there,
I didn't fully understand your question.
These harnesses are customized on both sides (c101 and x20) based on your setup. On the one side by your fusebox (c101), the harness is customized for your particular e30.
On the other side (x20), this side will be customized for the particular engine choice that you have in mind.
For your 86 e30, all that you will need to do is unplug your c101 by the fusebox and the c104 connector in your glove box. Then, simply plug in the "harness adapter" using the instructions that are included with the adapter. After that is connected, simply connect the other side of the harness adapter to the new engine harness.
Although you have all the wiring from both cars, you will still need something like this adapter harness to make everything work together (e30 cluster, oil level sensor, and A/C).
Hope this answers your question. If not, I'll try again :up:
I didn't fully understand your question.
These harnesses are customized on both sides (c101 and x20) based on your setup. On the one side by your fusebox (c101), the harness is customized for your particular e30.
On the other side (x20), this side will be customized for the particular engine choice that you have in mind.
For your 86 e30, all that you will need to do is unplug your c101 by the fusebox and the c104 connector in your glove box. Then, simply plug in the "harness adapter" using the instructions that are included with the adapter. After that is connected, simply connect the other side of the harness adapter to the new engine harness.
Although you have all the wiring from both cars, you will still need something like this adapter harness to make everything work together (e30 cluster, oil level sensor, and A/C).
Hope this answers your question. If not, I'll try again :up:
Comment