I'm finishing up my swap, I'm running a e36 318i radiator and I was under the impression that 525i hos3s are the ones to run but I found that they need too harsh of a curve and those hoses make the cut, any recommenations
-
-
The last 24v car I built, that used the M42 radiator, took E34 525i hoses, which had been seriously trimmed. Seemed to work ok. The fitment wasn't that great, but they weren't severely kinked. Another reason I had no interest in using that radiator...
-
You can only trim them so much before you lose the 1.5 section and get to the 1.25" and that won't fit over the thermo housing and the rad flangeComment
Comment