Wire harness guide help

[968Reckless]

Can't figure out where this bracket mounts. Anyone have a pic for reference?




Sent from my iPhone using Tapatalk

[36brua]

wire loom bracket. mnts to side of block under intake manifold. )BD 1/2 brackets are different

[968Reckless]

wire loom bracket. mnts to side of block under intake manifold. )BD 1/2 brackets are different

Thanks for the response. I know it's under the mani and on the block but I'm looking for a pic of the actual holes it get mounted to. What do you mean "1/2 brackets are different"? Thanks


Sent from my iPhone using Tapatalk

[mjweimer]

I don't have a great pic but do have a couple of views. I tried to highlight the bracket in the pics with red lines.

It is behind the CCV bracket and intake manifold supports. Front carries alternator wiring.



Towards the back it carries the main engine harness bundle.




MJ

[968Reckless]

I don't have a great pic but do have a couple of views. I tried to highlight the bracket in the pics with red lines.



It is behind the CCV bracket and intake manifold supports. Front carries alternator wiring.







Towards the back it carries the main engine harness bundle.









MJ

Perfect thanks!


Sent from my iPhone using Tapatalk

[Adrian_Visser]

Bringing this back from the dead here, I have the other type of wiring loom bracket that I am trying to install on my S52 with OBDI intake. Doesn't look like it's going to fit to me. Is the bracket in mjweimer's post an OBDI or OBDI one?

[mjweimer]

Adrian,

Bracket is OBD2 on my M52 engine.

A picture with the wiring harness installed can be found midway down in this post:

https://www.r3vlimited.com/board/showpost.php?p=4944361&postcount=65

MJ