Announcement

Collapse
No announcement yet.

Are these mods really worth it?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Are these mods really worth it?

    So, I'm wrapping up my s52 swap and am undecided between running the stock maf and injectors with m50 manifold or go 540i and 24lbs injectors. I've read and searched but I haven't really found the exact info. The euro s50b32 is running the 540i maf, but it's also running itbs so it would make sense to have a bigger maf for that set up. Looking for some input.

    Thanks

    #2
    Run stock maf and Injectors

    Check Us out on Facebook
    Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
    Full Product Line Tuning
    OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread

    Comment


      #3
      Yes. The bigger maf and injectors are really needed if you run out of those you will need bigger ones. And you need log your pulls to know that. The parts itself don't give you extra power. But I would say that only after 250-260 hp you will need to change those. Not with m50 intake manifold only. And after changing the injectors and/or maf you will need to properly tune the engine.
      Last edited by pazi88; 07-08-2017, 10:37 AM.

      Comment


        #4
        Thanks guys. So, are bigger injectors and bigger maf is pretty much a waste if I don't have a more aggressive cam right?

        Comment


          #5
          Originally posted by 328ijunkie View Post
          Run stock maf and Injectors
          I'd listen to this guy.
          Originally posted by kronus
          would be in depending on tip slant and tube size

          Comment


            #6
            Yeah that's what I'm figuring I will do. I've just been conflicted on what I've searched. Thanks for the info guys

            Comment

            Working...
            X