Best of the currently-on-ebay (cheap) M50 swap headers?

[irish44j]

They all look more or less the same, but I know some of you have tried specific ones that fit better than others for the M50 into e30 swap. Search turns up a lot of references to the "supersprint copy" one, but not entirely sure which one that is (and would rather not buy an actual supersprint).

Anyhow, if anyone has a link to a specific one that you personally know has the right clearances for the swap, it would be much appreciated.

I'm going to assume that the beefy e34 cast manifold and downpipe that are coming with my engine are NOT going to have appropriate clearance.

[TeXJ]

https://www.ebay.com/itm/FOR-89-96-BMW-E30-E36-3-SERIES-M42-B18-318-4-1-STAINLESS-HEADER-MANIFOLD-EXHAUST/381043866823?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D55992%26meid%3Dee492479b72d449ab341be39bf906b64%26pid%3D100005%26rk%3D5%26rkt%3D12%26mehot%3Dpp%26sd%3D361478978824%26itm%3D381043866823&_trksid=p2047675.c100005.m1851

These are the ones that I bought for my m52b28 swapped e30. There was some beating to get them to fit over the crossmember.

I know when I was looking, make sure that the type of metal used is good and that then thickness is good as well.

The above link is a seller that I saw others mention as well.

[e30austin]

“Speed daddy” is what I use on the cars I assemble. More reasonably priced than the rice-land headers and you can still run a stock style CAB, without fitment issues, unlike the RL units. They do have the occasional fitment issue, which is to be expected for the price.