Hey guys! I am currently doing the m52tu swap. I have put my e34 oil pan on it and the power steering pump inlet hose fouls it. What are my best options of getting around this? Also, wondering if a e38 ms42 loom will work and reach the proper ECU location correctly. Any help is appreciated. Cheers
-
-
Are you sure you are have m52tu the twin vanos one?
I have this issue as well with a z3 m52b28 engine. You will have to extend the bracket, which i found somewhere on this forum (you have to search) and use a longer belt.
Else maybe you can swap to another power steering pump.
Cheers
-
Thanks for your reply. 100% certain as it is a dual vanos from an e46. Can I used a bracket from another model possibly?Are you sure you are have m52tu the twin vanos one?
I have this issue as well with a z3 m52b28 engine. You will have to extend the bracket, which i found somewhere on this forum (you have to search) and use a longer belt.
Else maybe you can swap to another power steering pump.
CheersComment
Comment