tube from clutch cylinder?

[Bimmer335is]

What does this blue tube get hooked up to? It's comming from inside my car, on the clutch slave cylinder or whatever. As you can tell, I'm using e32 booster with remote resevior. As far as I understand, I have to run it to my resevior, is this correct? And what did you do with it? Thanks for the help. I hope to get my car running this week.

[trent]

THat goes to the brake fluid reseviour. That feeds brake fluid to the clutch master. You will have to bleed that system also.

[Bimmer335is]

how'd you hook it up if there are only 2 holes in the resevior to do so and those two go to the brake mc.

[Mike325]

You may have to get a small res to feed just the clutch. That is a common solution to this problem and many cars come from the factory with a seperate res for the clutch.

[trent]

You may have to get a small res to feed just the clutch. That is a common solution to this problem and many cars come from the factory with a seperate res for the clutch.

This is true. Most run the factory reseviour which has a obvious connection for this nipple. on the side.