Wiring clean up and mounting of misc.

[Mr.SWISS]

Let's see some pics of how you guys have cleaned up the wiring and mounted the relays, canister, ps res etc.

[Mr.SWISS]

So I guess all of you have wires all over and nothing mounted?

[FredK]

I left the charcoal canister in the stock location, and used the E36 mounting area for the steering rack. I have yet to neaten up the wiring, but I'll probably make some kind of rail for the engine harness, and use the 318is wiring cover.

[Mr.SWISS]

I was thinking about doing the same with the ps but I would like it close to were it was. I have so much extra lenghth on this harness and c101 with the treehouse adapter I am just lost were to start on hiding the wiring or tucking it somehow. The canister I think I am gonna mount it under the air filter so the purge valve plug will reach.

[02stu]

So I guess all of you have wires all over and nothing mounted?

pretty much

[Beej '86 325es]

http://www.panduit.com/products/

it is your friend...

[LINUS]

There's a "post your engine bay pic" thread going, if you look you can find just about everything, dang near everything has already been discussed.

Plus if you search and find, it's actually quicker than posting a new thread and waiting for people to post the same thing they posted last week.

Really, try it - I promise it works!

Here's a hint too - the cool wire covers are 318's and M3's - same part #'s.

[bdi_fc]

See this page for details about the wiring harness cover:

http://www.e30dohc.com/wiki/index.php?title=Wiring_harness_trim_panel

I used #s 21, 22, 23