m/s50 VC, Composite?

[Beau B]

I ended up have one bead blasted, sand is a little too abrassive for the soft metal, and that showed all the flaws so I skimmed it with bondo and painted it. After lots and lots of sanding to make it perfect.

[Van Westervelt]

You put bondo on your valve cover and then painted it? I wouldnt do the bondo, and you still just painted it, no powder coat etc.

[Mike B.]

If you polish Mg, it won't last for very long at high shine. Mg will oxidize quickly to a dark, dull gray.

Powder coating will work, but proper prep is essential.

[Mr.SWISS]

Fuck all that wrinkle FTW.

[Beau B]

You put bondo on your valve cover and then painted it? I wouldnt do the bondo, and you still just painted it, no powder coat etc.

It looks good and have had lots of compliments on it. You would not even know I had bondo in it if I didnt tell you. When done right you cant tell. And yeah no poweder coating because of reasons that have already been said..