Some dumb questions

[B3M2W5]

Ok i have a few questions before i pull my ETA out. Some are not realated to the ETA.

When you change the oil pan and suction pipe on the 24v. You dont have to oil the suction pipe or any thing do you its not going to like make an air pocket or any thing is it (Dumb question). Just put it on, cut the old mounting bracket and put the pan on and its good?

Another thing with the exhaust wich down pipe do you normaly use. I know you use the M50 ehxhaust mani, but what down pipe do you use the M20?

[RyanZ06]

You are correct, just install the pick-up tube, and break the bracket off.

For the exhaust, you'll need an E36 down pipe section...atleast that's what I used. :)

[B3M2W5]

Ok thanks