E36 Guibo?

[kroberts]

Ive been doing some research. just thought I would make sure I've got it right before I order. I've read that the E36 guibo is beefier than the E30 unit for the swap. I have a 97 S52, ZF, and E30M3 driveshaft. The E36 328i guibo is the one to use...right?

TIA,

kr

[Mike B.]

I used the ZF M3 flex disk (S50B32 / ZF / E30M3 driveshaft) and there were no issues with fitment.

[matt]

You need the e36 M3 guibo. The e30 325i one will not work. The e30 M3 one probably would, but don't quote me.

[equate975]

You need the e36 M3 guibo. The e30 325i one will not work. The e30 M3 one probably would, but don't quote me.

IIRC the e30 m3 one is still a lot thinner. Gustaves had some deal where he upgraded his with an e36 m3 one.

I used an e36 m3 one.

[kroberts]

Thanks Fellas

[sushipower]

Make sure you buy e30 m3 drive shaft bolts. The e36 drive shaft bolts are too long it will touch the trans housing.

good luck!