Sensors for obd2 to obd1 conversion

[svn2002s]

When ordering the following sensors everything should be for a 95 m3 right?

Crank Position Sensor
Cam Position Sensor
Ping/Knock Sensor
Oxygen Sensor

Just need to make sure I order the right stuff.

[matt]

The O2 sensor can be from almost anything... but not the OBD2 ones. Hell, the e30 one works fine.

You'll also need the wire to extend the Vanos solenoid lead if you're still using the OBDII vanos solenoid. The part number is in the wiki.

[svn2002s]

Thanks, I'll follow up with a PM later this week. Chip & DME (Do I need bigger injectors?)

[matt]

You probably don't, unless your setup is way not-stock. PM me your motor and mod info and I can do the math to be sure.

I have chips, injectors, and DMEs if you do need something.

[grib]

Don't forget that you'll need two knock sensors (same PN, qty 2) for the OBD1 setup. They are separate (and sold separately), unlike the OBD2 which is two sensors on one pigtail.