I was under my car today and noticed my tranny is really far to the right in the transmission tunnel. I can get a bar up there and pry it over enough to probably get the brace on but it seems like this is adding a lot of stress to all the mounting bolts. I cant figure out why its like this. The motor is an s50 with the matching trans.
Announcement
Collapse
No announcement yet.
My tranny is way to the right
Collapse
X
-
are you motor mount arms in the right spot and not back one set of holes on one side?My 2.9L Build!
Originally posted by Ernest HemingwayThere are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.
Comment
-
I dont see how my arms can be messed up. If the arms were in the wrong spot, the motor would sit really far off, not just an inch or two. After saying this however, i dont see how it can be anything but the arms/mounts. So this is something that is not of the norm, know one else is a sidways shooter? I will check out my mounts some more, i was just checking.
Comment
Comment