called turner for a chip they said nothing for me

[ericzz]

s52
pink tops
540 3.5hfm
413 red label dme
am I doing something wrong ?

[FredK]

Turner only has chips for 24# injectors, 3.5 HFM, S50. I believe Stickley (www.cssmotorsports.com) at one point did 21.5 injectors. I am not sure he still sells software. Active (www.aatuning.com) I think has a chip for that combo.

[ericzz]

Would you just buy the injectors and the chip from turner ? is it worth the $ for the upgrade ? is there a cheaper source for the injectors ? or a bosh part # I can get them from a local upplier I have an account with ? I would need an application to do so . Does anyone have an OEM application for these ?

[Van Westervelt]

I have a set of new 24 lb boschs from turner, 225 shipped for you.

[static]

contact MarkD, he will make a chip for you. He has one for 24#, but changing tune for 21.5# is a piece of cake

[325Projectz]

i called turner about that too. when i upgrade from a s50 to a s52, they said just run the same chip. (which i plan on)

i'm sure a custom tune would be ultimate, $$$.

[matt]

Turner only has chips for 24# injectors, 3.5 HFM, S50. I believe Stickley (www.cssmotorsports.com) at one point did 21.5 injectors. I am not sure he still sells software. Active (www.aatuning.com) I think has a chip for that combo.

Boo active chips. :down:

We should have a chip for this setup in the next few weeks. Need to find some time to hit the dyno with a box of injectors and MAFs and an S52. :up:

[BDSax]

^ Matt FTW.

When you comimg to florida and helping with my m50 swap!

[matt]

^ Matt FTW.

When you comimg to florida and helping with my m50 swap!

Heh, I wish. You talk to Ben? (///Mpressive)

[MarkD]

s52
pink tops
540 3.5hfm
413 red label dme
am I doing something wrong ?

I made a chip for that setup a few weeks ago for a track car.

[C ///M]

I made a chip for that setup a few weeks ago for a track car.

Hey Mark, I've tried emailing you a couple times in the past. I know you're a fairly busy individual.

Do you have any options for an E36 506 DME?

I currently run a pre 1/95 E36 M3 506 DME on my:
OBDI s52
euro 3.5" hfm
24# injectors

Do you have anything for me? I still run Turner's 3.0 liter software for the above application.

[MarkD]

Hey Mark, I've tried emailing you a couple times in the past. I know you're a fairly busy individual.

Do you have any options for an E36 506 DME?

I currently run a pre 1/95 E36 M3 506 DME on my:
OBDI s52
euro 3.5" hfm
24# injectors

Do you have anything for me? I still run Turner's 3.0 liter software for the above application.

I Chris,

I just sent you an email. I have something that should work but I don't know how it compares to what you have maybe your current chip is better.

I see you are in Chicago, I was there for a week in June.


Mark

[C ///M]

I Chris,

I just sent you an email. I have something that should work but I don't know how it compares to what you have maybe your current chip is better.

I see you are in Chicago, I was there for a week in June.


Mark

Thanks Mark, sent you a reply.