Announcement

Collapse
No announcement yet.

Almost done, but a couple problems: gear grind & brakes locked

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    have you tried adjusting the fork at all? I really think you should check that, everything seems to point to this. The brakes wont be stuck all the time, driving it for a shot while will make it worse. Just take off the clip, pull the spring off, and screw in the fork.
    https://www.youtube.com/channel/UC-h...wE3UqwjjmaTrXg

    Comment


      #17
      Quick update on this - over the weekend I checked the MC and booster fork. I think you guys were right, the fork was a turn or two too long. There was also something strange with the MC - there is a little slotted plate in one of the ports where the reservoir plugs in. It looked like the

      Anyway, the brakes are fixed - thanks for everyone's input!

      Not so good news on the transmission. Everything seems to point to the synchros on second gear being really, really toast. (I probably have a "money $hifted" ZF.)

      Fortunately there is a shop locally who will fix it for about $700. They seem to know BMWs/the transmission pretty well so I am confident that they know what they are doing. Has anyone else had this issue with a ZF320? Seems pretty common on the E36 M3 forum. Anything else they should replace while the transmission is opened up?

      1987 325i Cabrio - SOLD
      2014 Chevy Volt
      2007 FJ Cruiser

      Comment


        #18
        I would repalce the input and output shaft seals, shift selecter seal.

        Comment


          #19
          now you just need some LEDs

          and wider rubber ;)
          Nick

          87 325 5MT
          02 IS300 5MT

          Comment

          Working...
          X