Announcement

Collapse
No announcement yet.

Who is running the Stewart pump?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Who is running the Stewart pump?

    I just got mine yesterday with my alum bypass neck, gotta wait for AA to get my thermostat which should be today or tomorrow to get it back together.

    Should I see a good difference in the temp gauge and cooling behavior?
    5
    Yup, noticed a big difference
    20.00%
    1
    Yea, seems the same as a stock one.
    40.00%
    2
    Meh it's aight
    20.00%
    1
    They are a waste of $$, get a stock metal pump.
    20.00%
    1
    Originally posted by 325Projectz
    don't listen to the diagram... listen to mr. swiss.
    :nice:
    Tags: None
    #2
    eh, i plan on getting one... mainly because i'm going to run the m42 radiator when i put my car back together. what did you pay for it?

    what degree thermostat are you going to be running? are you going to use water wetter or something like it?
    91 m3

    Comment

      #3
      Originally posted by 325Projectz View Post
      eh, i plan on getting one... mainly because i'm going to run the m42 radiator when i put my car back together. what did you pay for it?

      what degree thermostat are you going to be running? are you going to use water wetter or something like it?
      I ordered a 71* from Active Autowerke for $30+12 shipping. (prolly the most expensive thremo I have ever bought) and got the water pump from Above All Motorworks for $189.
      Originally posted by 325Projectz
      don't listen to the diagram... listen to mr. swiss.
      :nice:

      Comment

        #4
        yeah, i had a 71º that i got from aa in my last car. i didn't like it... it never ran above the 1/3 mark. ~75º would be better. for street use,anyway.
        91 m3

        Comment

          #5
          Have one installed, but engine isn't running yet. Damn nice pump. I got mine from Bimmerworld when they had a combo deal going with the PWR radiators.
          -Brandon
          '86 325es S50
          '12 VW GTI Autobahn DSG
          '03 540i M-Sport (sold)
          '08 Jeep SRT-8 (sold)

          For sale:
          S50 TMS chip for Schricks

          Comment

            #6
            Well I got mine all back together and I noticed a little difference. It still gets hot running a\c in town or sitting at idle for extended amounts of time. I didn't start having these problems till I replaced my fan clutch so I think it is airflow related. I need to get my aux fan working. :(
            Originally posted by 325Projectz
            don't listen to the diagram... listen to mr. swiss.
            :nice:

            Comment

              #7
              Originally posted by Mr.SWISS View Post
              Well I got mine all back together and I noticed a little difference. It still gets hot running a\c in town or sitting at idle for extended amounts of time. I didn't start having these problems till I replaced my fan clutch so I think it is airflow related. I need to get my aux fan working. :(
              Make sure you put the fan on the correct direction. If its on backwards, it will blow air towards the radiator instead of towards the engine.

              Will
              RIP e30 (brilliantrot '91 325i) 11/17/06 Byebye: 8/21/07
              Welcome e30 (brilliantrot '90 325is) 12/23/06
              DaveCN = Old Man
              My signature picture was taken by ME! Not by anyone else!



              Originally posted by george graves
              If people keep quoting me in their sig, I'm going to burn this motherfucker down.

              Comment

              Previous template Next
              Working...
              X