throw out bearing and pilot bearing. m50 getrag

[nismoman]

what pilot bearing and throw out bearing are you using for the m50 with a 325eclutch and single mass fly wheel with the 260 tranny. also what about the pivot shaft and what not? essentially when you put the e tranny and fly wheel and clutch on what else do you need that is not from the e to make it work.

also this is using the e starter motor if that matters.

[tonytony]

use an m20 pilot bearing, and use the throwout bearing for the tranny your'e going to use

[B3M2W5]

^+1