Hey guys disregard the title
My car just died / stalled while I was driving 30mph. when I tried to start it
again the engine was turning perfectly but would not start.
I checked the voltage of all of the coil they all have 12v. The plugs looks dry.
I checked the main and fuel pump relay sockets it has 12v.
I jumped terminal 30 and 87 , the internal and external fuel pump ran.
I checked the crank sensor it has 580 ohm. I read on some thread that the 1000+ ohm reading in the bentley manual is wrong and that 500+ ohms is ok..
What do you guys think is the problem? fuel filter? ecu? Help..
My car just died / stalled while I was driving 30mph. when I tried to start it
again the engine was turning perfectly but would not start.
I checked the voltage of all of the coil they all have 12v. The plugs looks dry.
I checked the main and fuel pump relay sockets it has 12v.
I jumped terminal 30 and 87 , the internal and external fuel pump ran.
I checked the crank sensor it has 580 ohm. I read on some thread that the 1000+ ohm reading in the bentley manual is wrong and that 500+ ohms is ok..
What do you guys think is the problem? fuel filter? ecu? Help..