Anyone interested in T for oil pressure switch?

[bwh13]

I want to put a T on my S52 oil pump outlet where the pressure switch mounts so I can run a guage plus the light.

None of the ones I've seen, with the exception of some stupidly high dollar parts looks like what I want. So I've decided to look into to have some made. They will have 3 ports, (2) 1/8 NPT and (1) M12 for the pressure switch. They will be sort of Y shaped, with a M12 hole for a banjo bolt to thread into the oil filter housing where the switch normally goes.

If you're interested let me know.

[shiboujin]

I used brass plumbers stuff from my local hardware store. Whats wrong with that? Cost me like $3

[etxxz]

while you're at it, why not make it so that i can bolt to the stock oil cooler...or how about one for those doing obdI conversion for the water sensor or something like that i don't quite remember what it was but people feel like taping the head for some reason. = good ideas to make $$

[matt]

$50 is too expensive?

http://cgi.ebay.com/ebaymotors/BMW-Oil-Distribution-Block-Gauges-E36-M3-325-ODB-JTD_W0QQcmdZViewItemQQcategoryZ33676QQihZ020QQitemZ300171331866QQrdZ1QQsspagenameZWDVW

Ours is $20, BTW: http://www.racersmarket.net/catalog/...products_id=43 But we're out of stock at the moment.

[etxxz]

^^ there you go :D

[bwh13]

I'm thinking somewhere around $30-35 is what these things should sell for.

Kudos to the guy who has sold 140 of them, wish I'd been into Bimmers earlier I would have made them a year ago...