I'm in the middle of rebuilding my M50. Somehow, during the move, I lost two wrist pins. I've torn the garage apart twice, but no luck.
The manual makes a point about keeping pistons and wrist pins paired up.
Can I get some used wrist pins or do I need new ones?
I figure I shouldn't have to buy new pistons, as long as the clearances are still within spec. I've already installed new bushings in the pistons.
I need to get these to the machine shop so I can have the bushings honed and get on with this rebuild.
The manual makes a point about keeping pistons and wrist pins paired up.
Can I get some used wrist pins or do I need new ones?
I figure I shouldn't have to buy new pistons, as long as the clearances are still within spec. I've already installed new bushings in the pistons.
I need to get these to the machine shop so I can have the bushings honed and get on with this rebuild.