Picking it up tomorrow

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Jean
    replied
    Picked it up, didn't pay close attention to the flywheel side of it (automatic) and it's going back tomorrow for another one. Doh.
    Attached Files

    Leave a comment:


  • Jean
    replied
    Going into the white 325i once I prep it. I'll do something about cams/injectors/ecu later. For now they (injectors) are going to be sent off for cleaning/flow tested, and I am ordering new gaskets/hoses. Things I can remove w/o taking the whole engine apart are going to get hot tanked or blasted as well.

    Leave a comment:


  • dude8383
    replied
    Congrats man.

    What are your plans for it?

    Leave a comment:


  • Jason89i
    replied
    Originally posted by Jean
    True. Just wanted to make sure I wouldn't have unforseen issues by going with one from an auto.
    auto's dont have pilot bearings. so, you will need one of those.

    cheers, jason

    Leave a comment:


  • StereoInstaller1
    replied
    Cool, Jean.

    Pics soon?

    Which car is it going into, early or late?

    Leave a comment:


  • surebimmer
    replied
    I have two m50's in my backyard right now. Just waiting to find a cheap s52 to swap all the obd 1 stuff to it. Then into the m3. Have fun jean!

    Leave a comment:


  • Jean
    replied
    Alright, i'll pick one up, this time not from a dealer. I paid full msrp on my e30 bentley and saw them for like $20 less online lol.

    Leave a comment:


  • e30serg
    replied
    e36 bentley

    Leave a comment:


  • Jean
    replied
    You mean oil isn't good for the life of the engine? lawl.

    Thanks man! I didn't think they would accept my offer but they did, so yeah.

    Should I get an e34 or e36 bentley as the e30 bentley obviously doesnt' have any info on m50?

    Leave a comment:


  • Teaguer
    replied
    Originally posted by FredK
    In terms of engine health, I'd say it's a crapshoot. An auto owner might be someone who changes oil every 15K. A manual owner might be a teenager.
    Or worse yet the owner could have been ...Azn . Gasp .


    Congrats on getting the 24valver Jean .

    Leave a comment:


  • justin_l_
    replied
    Took 3 people to load my old m20 with tranny on a pallet into the back of a truck, you should be able to do it.

    Leave a comment:


  • Jean
    replied
    They are pulling one from a 95 5spd for me today. You guys think 3 guys is enough to lift the engine w/o tranny up and put it on the engine stand??

    Leave a comment:


  • Jean
    replied
    Just bought the maf,alternator and starter :) Next will be maint. stuff to clean it all up.

    Leave a comment:


  • golde30
    replied
    wiring harness is basically the same once you pull out all the auto-tranny crap, which is about 5lbs worth.

    Leave a comment:


  • Jean
    replied
    True. Just wanted to make sure I wouldn't have unforseen issues by going with one from an auto.

    Leave a comment:

Working...