Announcement

Collapse
No announcement yet.

Name these parts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Name these parts

    I am almost finished with my swap. I started last year and the car has been sitting since then in my garage, now I can't remember where some stuff goes:) please help. Which line in image 61 is pressure? I assume the larger?

    In image 57 there are three fuel lines (the pressure is easy to figure out) which is return and is the third evap?

    Image 65 has two pins one wire is brown and one is Red w/white stripe. I believe that is evap emission valve according to Mitchell on demand, sound correct? Do I need to hook up Evap valve?

    lastly, Image 66 large wire goes to main power distribution block and smaller goes to starter? Thanks for taking the time to read this and appreciate any help you may offer.
    John
    Attached Files
    Last edited by Jay325; 08-03-2008, 05:32 PM.

    #2
    61 yes and the other is return.

    56 looks like where the fuel lines come out of. look at the bently to find out which one delivers.

    66 i think they both go to the starter

    www.gutenparts.com
    One stop shopping for NEW, USED and EURO PARTS!

    Comment


      #3
      from top of the frame to bottom of the frame return, fuel feed, evap canister
      under the mani the silver line is feed the black is return, the red wires are e36 power cables to the fuse box and the started
      looking for a e30m50 swap harness adapter pm me $150 shipped
      email nitroman12@gmail.com

      Comment


        #4
        Thanks for the help so far.........But I am still a little in the dark with some wiring.

        There are two red cables on the drivers side coming from the e36 harness one is about four gauge and the other ten gauge do they both go to the starter? do they go somewhere else? Now on the passengers side of the harness there are two red wires and one black where do they go? I attached pictures of the two on the drivers side at the begining of the post. The other three are below. Lastly where do the magnetic pick ups coming out of the getrag 260 go and what is their function? I am assuming tach/speedo reference?
        Attached Files
        Last edited by Jay325; 08-04-2008, 03:00 AM.

        Comment


          #5
          yes im pretty sher they do

          www.gutenparts.com
          One stop shopping for NEW, USED and EURO PARTS!

          Comment


            #6
            I hooked that black wire to my starter.

            In total, the starter should have 4 wires going to it. That smaller red wire might be the positive that activates your fuel pump relay.

            Pic 65, looks like the IAT sensor under the intake manifold.
            I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.

            Paypal: vdang5@gmail.com

            Delta Auto Care
            2875-C Towerview Road
            Herndon, VA
            703.435.1375

            My Feedback Thread: Evil_Twin

            Comment

            Working...
            X