Announcement

Collapse
No announcement yet.

distribution block question - E34 harness

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    distribution block question - E34 harness

    To those of you who are using an E34 harness, where are you grounding the brown/orange wire coming from the engine wiring harness right near the DME? It's obviously too short to go to the strut tower.... I'm not afraid of lengthening it tho..

    cheers...
    Last edited by jflower; 08-28-2008, 09:15 PM.
    sigpic
    king of bad decisions.

    #2
    I am using the e34 harness and I have both of my grounds grounded to the engine bay battery try. I had to "adjust" the wires a little bit to make them reach. But no problem...
    www.classicdaily.net
    1970 m42 swapped 2002
    1985 LS1/T56 Swapped e28 (557e)

    www.blunttech.com - For all your parts needs

    Follow me on Instagram for constant build updates @classicdaily
    https://www.facebook.com/ClassicDailyLLC

    Comment


      #3
      Same here.. I grounded them to the battery tray where my old m42 harness was grounded. I got the DME in the glove box but had to mount it close to the back of the box since it wouldn't reach the original spot. I am thinking of lengthening the wires to put it in the original place.
      sigpic
      1990 E30 325ic (sold for more than I paid for it after 5 Years)
      1995 E30 325e (in progress)
      1987 E30 325is (totaled)
      1990 E30 325i
      1991 E30 318is M50 PWR
      1996 E36 328ic
      1997 Z3
      2006 F150 Super Crew 5.4L 6.5' bed The work horse (need something to drag all these old BMW's home for resurrection.)

      Comment

      Working...
      X